View 74HC4052_1659900.PDF datasheet online --- IC-ON-LINE

Datasheet File OCR Text:

d a t a sh eet product speci?cation supersedes data of 2003 may 16 2004 nov 11 integrated circuits 74HC4052; 74hct4052 dual 4-channel analog multiplexer, demultiplexer
2004 nov 11 2 philips semiconductors product speci?cation dual 4-channel analog multiplexer, demultiplexer 74HC4052; 74hct4052 features wide analog input voltage range from - 5 v to +5 v low on-resistance: C80 w (typical) at v cc - v ee = 4.5 v C70 w (typical) at v cc - v ee = 6.0 v C60 w (typical) at v cc - v ee = 9.0 v logic level translation: to enable 5 v logic to communicate with 5 v analog signals typical break before make built in complies with jedec standard no. 7a esd protection: C hbm eia/jesd22-a114-b exceeds 2000 v C mm eia/jesd22-a115-a exceeds 200 v. specified from - 40 c to +85 c and - 40 c to +125 c. applications analog multiplexing and demultiplexing digital multiplexing and demultiplexing signal gating. description the 74HC4052 and 74hct4052 are high-speed si-gate cmos devices and are pin compatible with the hef4052b. they are specified in compliance with jedec standard no. 7a. the 74HC4052 and 74hct4052 are dual 4-channel analog multiplexers or demultiplexers with common select logic. each multiplexer has four independent inputs/outputs (pins ny0 to ny3) and a common input/output (pin nz). the common channel select logics include two digital select inputs (pins s0 and s1) and an active low enable input (pin e). when pin e = low, one of the four switches is selected (low-impedance on-state) with pins s0 and s1. when pin e = high, all switches are in the high-impedance off-state, independent of pins s0 and s1. v cc and gnd are the supply voltage pins for the digital control inputs (pins s0, s1, and e). the v cc to gnd ranges are 2.0 v to 10.0 v for 74HC4052 and 4.5 v to 5.5 v for 74hct4052. the analog inputs/outputs (pins ny0 to ny3 and nz) can swing between v cc as a positive limit and v ee as a negative limit. v cc - v ee may not exceed 10.0 v. for operation as a digital multiplexer/demultiplexer, v ee is connected to gnd (typically ground). function table note 1. h = high voltage level l = low voltage level x = dont care. input (1) channel between es1s0 l l l ny0 and nz l l h ny1 and nz l h l ny2 and nz l h h ny3 and nz h x x none
2004 nov 11 3 philips semiconductors product speci?cation dual 4-channel analog multiplexer, demultiplexer 74HC4052; 74hct4052 quick reference data v ee = gnd = 0 v; t amb =25 c; t r =t f = 6 ns. notes 1. c pd is used to determine the dynamic power dissipation (p d in m w). p d =c pd v cc 2 f i n+ s [(c l +c s ) v cc 2 f o ] where: f i = input frequency in mhz; f o = output frequency in mhz; c l = output load capacitance in pf; c s = maximum switch capacitance in pf; v cc = supply voltage in volts; n = number of inputs switching; s [(c l +c s ) v cc 2 f o ] = sum of the outputs. 2. for 74HC4052 the condition is v i = gnd to v cc for 74hct4052 the condition is v i = gnd to v cc - 1.5 v. ordering information symbol parameter conditions typical unit 74HC4052 74hct4052 t pzh /t pzl turn-on time e or sn to v os c l = 15 pf; r l =1k w ; v cc =5v 28 18 ns t phz /t plz turn-off time e or sn to v os c l = 15 pf; r l =1k w ; v cc =5v 21 13 ns c i input capacitance 3.5 3.5 pf c pd power dissipation capacitance per switch notes 1 and 2 57 57 pf c s maximum switch capacitance independent (y) 5 5 pf common (z) 12 12 pf type number package temperature range pins package material code 74HC4052d - 40 c to +125 c 16 so16 plastic sot109-3 74hct4052d - 40 c to +125 c 16 so16 plastic sot109-3 74HC4052db - 40 c to +125 c 16 ssop16 plastic sot338-1 74hct4052db - 40 c to +125 c 16 ssop16 plastic sot338-1 74HC4052n - 40 c to +125 c 16 dip16 plastic sot38-9 74hct4052n - 40 c to +125 c 16 dip16 plastic sot38-9 74HC4052pw - 40 c to +125 c 16 tssop16 plastic sot403-1 74HC4052bq - 40 c to +125 c 16 dhvqfn16 plastic sot763-1 74hct4052bq - 40 c to +125 c 16 dhvqfn16 plastic sot763-1
2004 nov 11 4 philips semiconductors product speci?cation dual 4-channel analog multiplexer, demultiplexer 74HC4052; 74hct4052 pinning pin symbol description 1 2y0 independent input or output 2 2y2 independent input or output 3 2z common input or output 4 2y3 independent input or output 5 2y1 independent input or output 6 e enable input (active low) 7v ee negative supply voltage 8 gnd ground (0 v) 9 s1 select logic input 10 s0 select logic input 11 1y3 independent input or output 12 1y0 independent input or output 13 1z common input or output 14 1y1 independent input or output 15 1y2 independent input or output 16 v cc positive supply voltage handbook, halfpage 4052 mnb039 1 2 3 4 5 6 7 8 16 15 14 13 12 11 10 9 2y0 2y2 2z 2y3 2y1 e v ee gnd s1 s0 1y3 1y0 1z 1y1 1y2 v cc fig.1 pin configuration dip16, so16 and (t)ssop16. fig.2 pin configuration dhvqfn16. (1) the die substrate is attached to this pad using conductive die attach material. it can not be used as a supply pin or input. 001aac117 4052 v cc (1) v ee s0 e 1y3 2y1 1y0 2y3 1z 2z 1y1 2y2 1y2 gnd s1 2y0 v cc transparent top view 7 10 6 11 5 12 4 13 3 14 2 15 8 9 1 16 terminal 1 index area
2004 nov 11 5 philips semiconductors product speci?cation dual 4-channel analog multiplexer, demultiplexer 74HC4052; 74hct4052 handbook, halfpage mnb040 4 2 5 1 11 15 14 12 13 3 6 9 1z s0 s1 e 2z 2y3 2y2 2y1 2y0 1y3 1y2 1y1 1y0 10 fig.3 logic symbol. handbook, halfpage mnb041 11 15 14 12 4 2 5 9 1 10 0 6 g4 mdx 0 3 4 1 3 2 1 0 13 3 fig.4 iec logic symbol. handbook, full pagewidth mnb042 1 - of - 4 decoder logic level conversion 7 8 v ee gnd v cc 12 13 16 3 14 15 11 10 9 6 s0 s1 e 1 5 2 1y0 1z 2z 1y1 1y2 1y3 2y0 2y1 2y2 2y3 4 fig.5 functional diagram.
2004 nov 11 6 philips semiconductors product speci?cation dual 4-channel analog multiplexer, demultiplexer 74HC4052; 74hct4052 handbook, full pagewidth mnb043 from logic v cc v ee v ee v cc v cc v ee nyn nz v cc fig.6 schematic diagram (one switch). limiting values in accordance with the absolute maximum rating system (iec 60134); voltages are referenced to v ee = gnd (groun d = 0 v); note 1. notes 1. to avoid drawing v cc current out of pins nz, when switch current flows in pins nyn, the voltage drop across the bidirectional switch must not exceed 0.4 v. if the switch current flows into pins nz, no v cc current will flow out of pins nyn. in this case there is no limit for the voltage drop across the switch, but the voltages at pins nyn and nz may not exceed v cc or v ee . 2. for dip16 packages: above 70 c derate linearly with 12 mw/k. for so16 packages: above 70 c derate linearly with 8 mw/k. for ssop16 and tssop16 packages: above 60 c derate linearly with 5.5 mw/k. for dhvqfn16 packages: above 60 c derate linearly with 4.5 mw/k. symbol parameter conditions min. max. unit v cc supply voltage - 0.5 +11.0 v i ik input diode current v i <- 0.5 v or v i > v cc + 0.5 v - 20 ma i sk switch diode current v s <- 0.5 v or v s > v cc + 0.5 v - 20 ma i s switch current - 0.5 v < v s < v cc + 0.5 v - 25 ma i ee v ee current - 20 ma i cc ;i gnd v cc or gnd current - 50 ma t stg storage temperature - 65 +150 c p tot power dissipation t amb = - 40 c to +125 c; note - 500 mw p s power dissipation per switch - 100 mw
2004 nov 11 7 philips semiconductors product speci?cation dual 4-channel analog multiplexer, demultiplexer 74HC4052; 74hct4052 recommended operating conditions symbol parameter conditions 74HC4052 74hct4052 unit min. typ. max. min. typ. max. v cc supply voltage see figs 7 and 8 v cc - gnd 2.0 5.0 10.0 4.5 5.0 5.5 v v cc - v ee 2.0 5.0 10.0 2.0 5.0 10.0 v v i input voltage gnd - v cc gnd - v cc v v s switch voltage v ee - v cc v ee - v cc v t amb operating ambient temperature see dc and ac characteristics per device - 40 +25 +85 - 40 +25 +85 c - 40 - +125 - 40 - +125 c t r , t f input rise and fall times v cc = 2.0 v - 6.0 1000 - 6.0 500 ns v cc = 4.5 v - 6.0 500 - 6.0 500 ns v cc = 6.0 v - 6.0 400 - 6.0 500 ns v cc = 10.0 v - 6.0 250 - 6.0 500 ns handbook, halfpage 04 12 12 0 4 8 8 mnb044 operating area v cc - gnd (v) v cc - v ee (v) fig.7 guaranteed operating area as a function of the supply voltages for 74HC4052. handbook, halfpage 0 12 6 10 8 2 4 04 12 8 mnb045 operating area v cc - gnd (v) v cc - v ee (v) fig.8 guaranteed operating area as a function of the supply voltages for 74hct4052.
2004 nov 11 8 philips semiconductors product speci?cation dual 4-channel analog multiplexer, demultiplexer 74HC4052; 74hct4052 dc characteristics family 74HC4052 v is is the input voltage at pins nyn or nz, whichever is assigned as an input; v os is the output voltage at pins nz or nyn, whichever is assigned as an output; voltages are referenced to gnd (ground = 0 v). symbol parameter test conditions min. typ. max. unit other v cc (v) v ee (v) t amb = - 40 c to +85 c ; note 1 v ih high-level input voltage 2.0 - 1.5 1.2 - v 4.5 - 3.15 2.4 - v 6.0 - 4.2 3.2 - v 9.0 - 6.3 4.7 - v v il low-level input voltage 2.0 -- 0.8 0.5 v 4.5 -- 2.1 1.35 v 6.0 -- 2.8 1.8 v 9.0 -- 4.3 2.7 v i li input leakage current v i =v cc or gnd 6.0 0 -- 1.0 m a 10.0 0 -- 2.0 m a i s(off) analog switch off-state current v i =v ih or v il ; v s ? =v cc - v ee ; see fig.9 per channel 10.0 0 -- 1.0 m a all channels 10.0 0 -- 2.0 m a i s(on) analog switch on-state current v i =v ih or v il ; v s ? =v cc - v ee ; see fig.10 10.0 0 -- 2.0 m a i cc quiescent supply current v i =v cc or gnd; v is =v ee or v cc ; v os =v cc or v ee 6.0 0 -- 80.0 m a 10.0 0 -- 160.0 m a
2004 nov 11 9 philips semiconductors product speci?cation dual 4-channel analog multiplexer, demultiplexer 74HC4052; 74hct4052 note 1. all typical values are measured at t amb =25 c. t amb = - 40 c to +125 c v ih high-level input voltage 2.0 - 1.5 -- v 4.5 - 3.15 -- v 6.0 - 4.2 -- v 9.0 - 6.3 -- v v il low-level input voltage 2.0 --- 0.5 v 4.5 --- 1.35 v 6.0 --- 1.8 v 9.0 --- 2.7 v i li input leakage current v i =v cc or gnd 6.0 0 -- 1.0 m a 10.0 0 -- 2.0 m a i s(off) analog switch off-state current v i =v ih or v il ; v s ? =v cc - v ee ; see fig.9 per channel 10.0 0 -- 1.0 m a all channels 10.0 0 -- 2.0 m a i s(on) analog switch on-state current v i =v ih or v il ; v s ? =v cc - v ee ; see fig.10 10.0 0 -- 2.0 m a i cc quiescent supply current v i =v cc or gnd; v is =v ee or v cc ; v os =v cc or v ee 6.0 0 -- 160 m a 10.0 0 -- 320.0 m a symbol parameter test conditions min. typ. max. unit other v cc (v) v ee (v)
2004 nov 11 10 philips semiconductors product speci?cation dual 4-channel analog multiplexer, demultiplexer 74HC4052; 74hct4052 family 74hct4052 v is is the input voltage at pins nyn or nz, whichever is assigned as an input; v os is the output voltage at pins nz or nyn, whichever is assigned as an output; voltages are referenced to gnd (ground = 0 v). note 1. all typical values are measured at t amb =25 c. symbol parameter test conditions min. typ. max. unit other v cc (v) v ee (v) t amb = - 40 c to +85 c ; note 1 v ih high-level input voltage 4.5 to 5.5 - 2.0 1.6 - v v il low-level input voltage 4.5 to 5.5 -- 1.2 0.8 v i li input leakage current v i =v cc or gnd 5.5 0 -- 1.0 m a i s(off) analog switch off-state current v i =v ih or v il ; v s ? =v cc - v ee ; see fig.9 per channel 10.0 0 -- 1.0 m a all channels 10.0 0 -- 2.0 m a i s(on) analog switch on-state current v i =v ih or v il ; v s ? =v cc - v ee ; see fig.10 10.0 0 -- 2.0 m a i cc quiescent supply current v i =v cc or gnd; v is =v ee or v cc ; v os =v cc or v ee 5.5 0 -- 80.0 m a 5.0 - 5.0 -- 160.0 m a d i cc additional quiescent supply current per input v i =v cc - 2.1 v; other inputs at v cc or gnd 4.5 to 5.5 0 - 45 202.5 m a t amb = - 40 c to +125 c v ih high-level input voltage 4.5 to 5.5 - 2.0 -- v v il low-level input voltage 4.5 to 5.5 --- 0.8 v i li input leakage current v i =v cc or gnd 5.5 0 -- 1.0 m a i s(off) analog switch off-state current v i =v ih or v il ; v s ? =v cc - v ee ; see fig.9 per channel 10.0 0 -- 1.0 m a all channels 10.0 0 -- 2.0 m a i s(on) analog switch on-state current v i =v ih or v il ; v s ? =v cc - v ee ; see fig.10 10.0 0 -- 2.0 m a i cc quiescent supply current v i =v cc or gnd; v is =v ee or v cc ; v os =v cc or v ee 5.5 0 -- 160.0 m a 5.0 - 5.0 -- 320.0 m a d i cc additional quiescent supply current per input v i =v cc - 2.1 v; other inputs at v cc or gnd 4.5 to 5.5 0 -- 220.5 m a
2004 nov 11 11 philips semiconductors product speci?cation dual 4-channel analog multiplexer, demultiplexer 74HC4052; 74hct4052 handbook, full pagewidth mnb048 aa nyn nz v i = v cc or v ee v o = v ee or v cc low (from select input) v ee fig.9 test circuit for measuring off-state current. handbook, full pagewidth mnb049 a nyn nz v i = v ee or v cc v o (open circuit) high (from select input) v ee fig.10 test circuit for measuring on-state current.
2004 nov 11 12 philips semiconductors product speci?cation dual 4-channel analog multiplexer, demultiplexer 74HC4052; 74hct4052 resistance r on for 74HC4052 and 74hct4052 v is is the input voltage at pins nyn or nz, whichever is assigned as an input; see notes 1 and 2; see fig.11. notes 1. for 74HC4052: v cc - gnd or v cc - v ee = 2.0, 4.5, 6.0 and 9.0 v; for 74hct4052: v cc - gnd = 4.5 and 5.5 v, v cc - v ee = 2.0, 4.5, 6.0 and 9.0 v. 2. when supply voltages (v cc - v ee ) near 2.0 v the analog switch on-resistance becomes extremely non-linear. when using a supply of 2 v, it is recommended to use these devices only for transmitting digital signals. 3. all typical values are measured at t amb =25 c. symbol parameter test conditions min. typ. max. unit other v cc (v) v ee (v) i s ( m a) t amb = - 40 c to +85 c ; note 3 r on(peak) on-resistance (peak) v is =v cc to v ee ; v i =v ih or v il 2.0 0 100 ---w 4.5 0 1000 - 100 225 w 6.0 0 1000 - 90 200 w 4.5 - 4.5 1000 - 70 165 w r on(rail) on-resistance (rail) v is =v ee ; v i =v ih or v il 2.0 0 100 - 150 -w 4.5 0 1000 - 80 175 w 6.0 0 1000 - 70 150 w 4.5 - 4.5 1000 - 60 130 w v is =v cc ; v i =v ih or v il 2.0 0 100 - 150 -w 4.5 0 1000 - 90 200 w 6.0 0 1000 - 80 175 w 4.5 - 4.5 1000 - 65 150 w d r on maximum on-resistance difference between any two channels v is =v cc to v ee ; v i =v ih or v il 2.0 0 - ---w 4.5 0 -- 9 -w 6.0 0 -- 8 -w 4.5 - 4.5 -- 6 -w t amb = - 40 c to +125 c r on(peak) on-resistance (peak) v is =v cc to v ee ; v i =v ih or v il 2.0 0 100 ---w 4.5 0 1000 -- 270 w 6.0 0 1000 -- 240 w 4.5 - 4.5 1000 -- 195 w r on(rail) on-resistance (rail) v is =v ee ; v i =v ih or v il 2.0 0 100 ---w 4.5 0 1000 -- 210 w 6.0 0 1000 -- 180 w 4.5 - 4.5 1000 -- 160 w v is =v cc ; v i =v ih or v il 2.0 0 100 ---w 4.5 0 1000 -- 240 w 6.0 0 1000 -- 210 w 4.5 - 4.5 1000 -- 180 w
2004 nov 11 13 philips semiconductors product speci?cation dual 4-channel analog multiplexer, demultiplexer 74HC4052; 74hct4052 handbook, full pagewidth mnb046 v nyn nz i is v is = 0 to v cc - v ee high (from select input) v ee fig.11 test circuit for measuring r on . handbook, halfpage 09 100 0 20 40 60 80 1.8 3.6 5.4 7.2 mnb047 r on ( w ) v is (v) (1) (2) (3) fig.12 typical r on as a function of input voltage v is . v is =0v tov cc - v ee (1) v cc = 4.5 v (2) v cc =6v (3) v cc =9v
2004 nov 11 14 philips semiconductors product speci?cation dual 4-channel analog multiplexer, demultiplexer 74HC4052; 74hct4052 ac characteristics type 74HC4052 gnd = 0 v; t r =t f = 6 ns; c l =50pf. note 1. all typical values are measured at t amb =25 c. symbol parameter test conditions min. typ. max. unit other v cc (v) v ee (v) t amb = - 40 c to +85 c; note 1 t phl /t plh propagation delay v is to v os r l = ; see fig.19 2.0 0 - 14 75 ns 4.5 0 - 515ns 6.0 0 - 413ns 4.5 - 4.5 - 410ns t pzh /t pzl turn-on time e, sn to v os r l = ; see figs 20, 22 and 21 2.0 0 - 105 405 ns 4.5 0 - 38 81 ns 6.0 0 - 30 69 ns 4.5 - 4.5 - 26 58 ns t phz /t plz turn-off time e, sn to v os r l =1k w ; see figs 20, 22 and 21 2.0 0 - 74 315 ns 4.5 0 - 27 63 ns 6.0 0 - 22 54 ns 4.5 - 4.5 - 22 48 ns t amb = - 40 c to +125 c t phl /t plh propagation delay v is to v os r l = ; see fig.19 2.0 0 -- 90 ns 4.5 0 -- 18 ns 6.0 0 -- 15 ns 4.5 - 4.5 -- 12 ns t pzh /t pzl turn-on time e, sn to v os r l = ; see figs 20, 22 and 21 2.0 0 -- 490 ns 4.5 0 -- 98 ns 6.0 0 -- 83 ns 4.5 - 4.5 -- 69 ns t phz /t plz turn-off time e, sn to v os r l =1k w ; see figs 20, 22 and 21 2.0 0 -- 375 ns 4.5 0 -- 75 ns 6.0 0 -- 64 ns 4.5 - 4.5 -- 57 ns
2004 nov 11 15 philips semiconductors product speci?cation dual 4-channel analog multiplexer, demultiplexer 74HC4052; 74hct4052 type 74hct4052 gnd = 0 v; t r =t f = 6 ns; c l =50pf. note 1. all typical values are measured at t amb =25 c. symbol parameter test conditions min. typ. max. unit other v cc (v) v ee (v) t amb = - 40 c to +85 c ; note 1 t phl /t plh propagation delay v is to v os r l = ; see fig.19 4.5 0 - 515ns 4.5 - 4.5 - 410ns t pzh /t pzl turn-on time e, sn to v os r l =1k w ; see figs 20, 22 and 21 4.5 0 - 41 88 ns 4.5 - 4.5 - 28 60 ns t phz t plz turn-off time e, sn to v os r l =1k w ; see figs 20, 22 and 21 4.5 0 - 26 63 ns 4.5 - 4.5 - 21 48 ns t amb = - 40 c to +125 c t phl /t plh propagation delay v is to v os r l = ; see fig.19 4.5 0 -- 18 ns 4.5 - 4.5 -- 12 ns t pzh /t pzl turn-on time e, sn to v os r l =1k w ; see figs 20, 22 and 21 4.5 0 -- 105 ns 4.5 - 4.5 -- 72 ns t phz /t plz turn-off time e, sn to v os r l =1k w ; see figs 20, 22 and 21 4.5 0 -- 75 ns 4.5 - 4.5 -- 57 ns
2004 nov 11 16 philips semiconductors product speci?cation dual 4-channel analog multiplexer, demultiplexer 74HC4052; 74hct4052 type 74HC4052 and 74hct4052 recommended conditions and typical values; gnd = 0 v; t amb =25 c; c l =50pf.v is is the input voltage at pins nyn or nz, whichever is assigned as an input. v os is the output voltage at pins nyn or nz, whichever is assigned as an output. notes 1. adjust input voltage v is to 0 dbm level (0 db m = 1 mw into 600 w ). 2. adjust input voltage v is to 0 dbm level at v os for 1 mhz (0 dbm = 1 mw into 50 w ). symbol parameter test conditions typ. unit other v is(p-p) (v) v cc (v) v ee (v) d sin sine-wave distortion f = 1 khz; r l =10k w ; see fig.13 4.0 2.25 - 2.25 0.04 % 8.0 4.5 - 4.5 0.02 % f = 10 khz; r l =10k w ; see fig.13 4.0 2.25 - 2.25 0.12 % 8.0 4.5 - 4.5 0.06 % a off(feedthr) switch off signal feed-through r l = 600 w ; f = 1 mhz; see figs 14 and 15 note 1 2.25 - 2.25 - 50 db 4.5 - 4.5 - 50 db a ct(s) crosstalk between two switches/multiplexers r l = 600 w ; f = 1 mhz; see fig.16 note 1 2.25 - 2.25 - 60 db 4.5 - 4.5 - 60 db v ct(p-p) crosstalk voltage between control and any switch (peak-to-peak value) r l = 600 w ; f = 1 mhz; e or sn, square-wave between v cc and gnd, t r =t f = 6 ns; see fig.17 - 4.5 0 110 mv 4.5 - 4.5 220 mv f max minimum frequency response ( - 3db) r l =50 w ; see figs 13 and 18 note 2 2.25 - 2.25 170 mhz 4.5 - 4.5 180 mhz c s maximum switch capacitance independent (y) --- 5pf common (z) --- 12 pf handbook, full pagewidth mnb052 10 m f r l v os v is c l db nz/nyn nyn/nz gnd channel on fig.13 test circuit for measuring sine-wave distortion and minimum frequency response.
2004 nov 11 17 philips semiconductors product speci?cation dual 4-channel analog multiplexer, demultiplexer 74HC4052; 74hct4052 fig.14 test circuit for measuring switch off signal feed-through. handbook, full pagewidth mnb053 0.1 m f r l v os v is c l db nz/nyn nyn/nz gnd channel off handbook, full pagewidth 0 - 20 - 40 - 60 - 80 - 100 mnb050 10 10 2 10 3 10 4 10 5 10 6 f (khz) (db) fig.15 typical switch off signal feed-through as a function of frequency. test conditions: v cc = 4.5 v; gnd = 0 v; v ee = - 4.5 v; r l =50 w ;r source =1k w. handbook, full pagewidth mnb054 r l r l 0.1 m f nz/nyn nyn/nz channel on (a) c l gnd v is r l r l nz/nyn nyn/nz channel off (b) c l gnd v os db fig.16 test circuits for measuring crosstalk between any two switches/multiplexers. (a) channel on condition. (b) channel off condition.
2004 nov 11 18 philips semiconductors product speci?cation dual 4-channel analog multiplexer, demultiplexer 74HC4052; 74hct4052 handbook, full pagewidth dut mnb055 2r l 2r l 2r l 2r l nz/nyn nyn/nz c l oscilloscope v cc v cc gnd v ee v(p - p) sn or e fig.17 test circuit for measuring crosstalk between control and any switch. the crosstalk is defined as follows (oscilloscope output): handbook, full pagewidth 5 0 - 5 mnb051 10 10 2 10 3 10 4 10 5 10 6 f (khz) (db) fig.18 typical frequency response. test conditions: v cc = 4.5 v; gnd = 0 v; v ee = - 4.5 v; r l =50 w ; r source =1k w.
2004 nov 11 19 philips semiconductors product speci?cation dual 4-channel analog multiplexer, demultiplexer 74HC4052; 74hct4052 ac waveforms handbook, halfpage mnb056 t plh t phl 50% 50% v is input v os output gnd v i v oh v ol fig.19 waveforms showing the input (v is ) to output (v os ) propagation delays. handbook, full pagewidth mnb057 t plz t r t f t phz switch off switch on switch on v os output v os output e, sn input v m 10% 90% 90% 10% t pzl t pzh 50% 50% fig.20 waveforms showing the turn-on and turn-off times. for 74HC4052: v m = 50 %; v i = gnd to v cc . for 74hct4052: v m = 1.3 v; v i = gnd to 3 v.
2004 nov 11 20 philips semiconductors product speci?cation dual 4-channel analog multiplexer, demultiplexer 74HC4052; 74hct4052 handbook, full pagewidth mnb059 t thl (t f )t tlh (t r ) v m t w positive input pulse negative input pulse 0 v amplitude 90% 10% t tlh (t r )t thl (t f ) v m t w 0 v amplitude 90% 10% fig.21 input pulse definitions. family amplitude v m t r and t f f max ; pulse width other 74HC4052 v cc 50 % < 2ns 6ns 74hct4052 3.0 v 1.3 v < 2ns 6ns handbook, full pagewidth open switch v cc v ee gnd v cc v is v i v o mnb058 d.u.t. c l r t r l pulse generator fig.22 test circuit for measuring ac performance. test switch v is t pzh v ee v cc t pzl v cc v ee t phz v ee v cc t plz v cc v ee other open pulse definitions for test circuit: r l = load resistance c l = load capacitance including jig and probe capacitance. r t = termination resistance should be equal to the output impedance z o of the pulse generator. t r =t f = 6 ns; when measuring f max , there is no constraint to t r and t f with 50 % duty factor.
2004 nov 11 21 philips semiconductors product speci?cation dual 4-channel analog multiplexer, demultiplexer 74HC4052; 74hct4052 package outlines references outline version european projection issue date iec jedec jeita sot38-9 97-07-24 03-03-12 m h c m e a l seating plane w m e d a 2 a 1 b 1 b 2 z 16 1 9 8 e pin 1 index b 0 5 10 mm scale note 1. plastic or metal protrusions of 0.25 mm (0.01 inch) maximum per side are not included. unit a max. b 1 (1) (1) (1) b 2 cd e e m h z l mm dimensions (mm dimensions are derived from the original inch dimensions) a 1 min. a 2 max. b max. w m e e 1 1.65 1.40 0.51 0.41 0.36 0.20 19.3 18.8 6.45 6.24 3.81 2.92 0.254 2.54 7.62 8.23 7.62 9.40 8.38 0.76 4.32 0.38 3.56 inches 0.065 0.055 0.020 0.016 0.014 0.008 1.14 0.76 0.045 0.030 0.76 0.74 0.254 0.246 0.150 0.115 0.01 0.1 0.3 0.324 0.300 0.37 0.33 0.03 0.17 0.015 0.14 dip16: plastic dual in-line package; 16 leads (300 mil) sot38-9 (e 1 )
2004 nov 11 22 philips semiconductors product speci?cation dual 4-channel analog multiplexer, demultiplexer 74HC4052; 74hct4052 x w m q a a 1 a 2 b p d h e l p detail x e z e c l v m a (a ) 3 a 8 9 1 16 y pin 1 index unit a max. a 1 a 2 a 3 b p cd (1) e (1) (1) eh e ll p z y w v q references outline version european projection issue date iec jedec jeita mm inches 1.75 0.25 0.10 1.55 1.40 0.25 0.49 0.36 0.25 0.19 10.0 9.8 4.0 3.8 1.27 6.2 5.8 0.7 0.3 8 0 o o 0.25 0.1 dimensions (inch dimensions are derived from the original mm dimensions) note 1. plastic or metal protrusions of 0.15 mm (0.006 inch) maximum per side are not included. 1.0 0.4 sot109-3 98-12-23 03-02-19 ms-012ac 0.069 0.010 0.004 0.061 0.055 0.01 0.019 0.014 0.0100 0.0075 0.39 0.38 0.16 0.15 0.05 1.05 0.041 0.244 0.228 0.028 0.012 0.01 0.25 0.01 0.004 0.039 0.016 0 2.5 5 mm scale so16: plastic small outline package; 16 leads; body width 3.9 mm; body thickness 1.47 mm sot109-3
2004 nov 11 23 philips semiconductors product speci?cation dual 4-channel analog multiplexer, demultiplexer 74HC4052; 74hct4052 unit a 1 a 2 a 3 b p cd (1) e (1) eh e ll p qz y w v q references outline version european projection issue date iec jedec jeita mm 0.21 0.05 1.80 1.65 0.25 0.38 0.25 0.20 0.09 6.4 6.0 5.4 5.2 0.65 1.25 7.9 7.6 1.03 0.63 0.9 0.7 1.00 0.55 8 0 o o 0.13 0.2 0.1 dimensions (mm are the original dimensions) note 1. plastic or metal protrusions of 0.25 mm maximum per side are not included. sot338-1 99-12-27 03-02-19 (1) w m b p d h e e z e c v m a x a y 1 8 16 9 q a a 1 a 2 l p q detail x l (a ) 3 mo-150 pin 1 index 0 2.5 5 mm scale ssop16: plastic shrink small outline package; 16 leads; body width 5.3 mm sot338-1 a max. 2
2004 nov 11 24 philips semiconductors product speci?cation dual 4-channel analog multiplexer, demultiplexer 74HC4052; 74hct4052 unit a 1 a 2 a 3 b p cd (1) e (2) (1) eh e ll p qz y w v q references outline version european projection issue date iec jedec jeita mm 0.15 0.05 0.95 0.80 0.30 0.19 0.2 0.1 5.1 4.9 4.5 4.3 0.65 6.6 6.2 0.4 0.3 0.40 0.06 8 0 o o 0.13 0.1 0.2 1 dimensions (mm are the original dimensions) notes 1. plastic or metal protrusions of 0.15 mm maximum per side are not included. 2. plastic interlead protrusions of 0.25 mm maximum per side are not included. 0.75 0.50 sot403-1 mo-153 99-12-27 03-02-18 w m b p d z e 0.25 18 16 9 q a a 1 a 2 l p q detail x l (a ) 3 h e e c v m a x a y 0 2.5 5 mm scale tssop16: plastic thin shrink small outline package; 16 leads; body width 4.4 mm sot403-1 a max. 1.1 pin 1 index
2004 nov 11 25 philips semiconductors product speci?cation dual 4-channel analog multiplexer, demultiplexer 74HC4052; 74hct4052 terminal 1 index area 0.5 1 a 1 e h b unit y e 0.2 c references outline version european projection issue date iec jedec jeita mm 3.6 3.4 d h 2.15 1.85 y 1 2.6 2.4 1.15 0.85 e 1 2.5 0.30 0.18 0.05 0.00 0.05 0.1 dimensions (mm are the original dimensions) sot763-1 mo-241 - - - - - - 0.5 0.3 l 0.1 v 0.05 w 0 2.5 5 mm scale sot763-1 dhvqfn16: plastic dual in-line compatible thermal enhanced very thin quad flat package; no leads; 16 terminals; body 2.5 x 3.5 x 0.85 mm a (1) max. a a 1 c detail x y y 1 c e l e h d h e e 1 b 27 15 10 9 8 1 16 x d e c b a terminal 1 index area a c c b v m w m e (1) note 1. plastic or metal protrusions of 0.075 mm maximum per side are not included. d (1) 02-10-17 03-01-27
2004 nov 11 26 philips semiconductors product speci?cation dual 4-channel analog multiplexer, demultiplexer 74HC4052; 74hct4052 data sheet status notes 1. please consult the most recently issued data sheet before initiating or completing a design. 2. the product status of the device(s) described in this data sheet may have changed since this data sheet was published. the latest information is available on the internet at url http://www.semiconductors.philips.com. 3. for data sheets describing multiple type numbers, the highest-level product status determines the data sheet status. level data sheet status (1) product status (2)(3) definition i objective data development this data sheet contains data from the objective speci?cation for product development. philips semiconductors reserves the right to change the speci?cation in any manner without notice. ii preliminary data quali?cation this data sheet contains data from the preliminary speci?cation. supplementary data will be published at a later date. philips semiconductors reserves the right to change the speci?cation without notice, in order to improve the design and supply the best possible product. iii product data production this data sheet contains data from the product speci?cation. philips semiconductors reserves the right to make changes at any time in order to improve the design, manufacturing and supply. relevant changes will be communicated via a customer product/process change noti?cation (cpcn). definitions short-form specification ? the data in a short-form specification is extracted from a full data sheet with the same type number and title. for detailed information see the relevant data sheet or data handbook. limiting values definition ? limiting values given are in accordance with the absolute maximum rating system (iec 60134). stress above one or more of the limiting values may cause permanent damage to the device. these are stress ratings only and operation of the device at these or at any other conditions above those given in the characteristics sections of the specification is not implied. exposure to limiting values for extended periods may affect device reliability. application information ? applications that are described herein for any of these products are for illustrative purposes only. philips semiconductors make no representation or warranty that such applications will be suitable for the specified use without further testing or modification. disclaimers life support applications ? these products are not designed for use in life support appliances, devices, or systems where malfunction of these products can reasonably be expected to result in personal injury. philips semiconductors customers using or selling these products for use in such applications do so at their own risk and agree to fully indemnify philips semiconductors for any damages resulting from such application. right to make changes ? philips semiconductors reserves the right to make changes in the products - including circuits, standard cells, and/or software - described or contained herein in order to improve design and/or performance. when the product is in full production (status production), relevant changes will be communicated via a customer product/process change notification (cpcn). philips semiconductors assumes no responsibility or liability for the use of any of these products, conveys no licence or title under any patent, copyright, or mask work right to these products, and makes no representations or warranties that these products are free from patent, copyright, or mask work right infringement, unless otherwise specified.
? koninklijke philips electronics n.v. 2004 sca76 all rights are reserved. reproduction in whole or in part is prohibited without the prior written consent of the copyright owne r. the information presented in this document does not form part of any quotation or contract, is believed to be accurate and reliable and may be changed without notice. no liability will be accepted by the publisher for any consequence of its use. publication thereof does not con vey nor imply any license under patent- or other industrial or intellectual property rights. philips semiconductors C a worldwide company contact information for additional information please visit http://www.semiconductors.philips.com . fax: +31 40 27 24825 for sales of?ces addresses send e-mail to: sales.addresses@www.semiconductors.philips.com . printed in the netherlands r44/04/pp 27 date of release: 2004 nov 11 document order number: 9397 750 14189

▲Up To Search▲

Price & Availability of 74HC4052

	To Download 74HC4052 Datasheet File
If you can't view the Datasheet, Please click here to try to view without PDF Reader .